H06.05 Software Installation and Upgrade Guide

Installing SWID, DSM/SCM PVU, and Planner
Interface (PI) Client Software
H06.05 Software Installation and Upgrade Guide—541762-003
B-11
Verify That the H02 PVU of DSM/SCM Is Installed
2. If necessary, press Enter to have STARTSCM run the IPM6031 TACL macro
automatically. This step takes several minutes.
Verify That the H02 PVU of DSM/SCM Is Installed
To verify that the latest H02 product version of DSM/SCM is currently installed on your
system, use the VPROC command to display the product version of TAEXE (Apply
product of DSM/SCM) and CBEXE (Build product of DSM/SCM). At a TACL prompt,
enter:
> volume $dsmscm_vol.ZDSMSCM
> vproc taexe
> vproc cbexe
This example shows the H02 product version of DSM/SCM after DSM/SCM has been
activated. (Bold lettering is used to show the VPROC command and the latest version):
\DRP08.$DSMSCM.ZDSMSCM 2> vproc cbexe
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \DRP08 Date 29 JUN 2005, 18:20:02
Copyright 2004 Hewlett-Packard Development Company, L.P.
$DSMSCM.ZDSMSCM.CBEXE
Binder timestamp: 11JUN2005 15:59:49
Version procedure: S7032H06^01OCT2004^SWARCCP^H01
Version procedure: T6031H02_11JUN2005_17NOV05H02
Target CPU: UNSPECIFIED
OCA timestamp: 17NOV2005 16:06:21
\DRP08.$DSMSCM.ZDSMSCM 3> vproc taexe
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \DRP08 Date 29 JUN 2005, 18:20:13
Copyright 2004 Hewlett-Packard Development Company, L.P.
$DSMSCM.ZDSMSCM.TAEXE
Binder timestamp: 16DEC2005 16:31:25
Version procedure: S7032H06^01OCT2004^SWARCCP^H01
Version procedure: T6031H02_01NOV2005_16DEC05ABQ
Target CPU: UNSPECIFIED
OCA timestamp: 16DEC2005 16:36:28
Privileged code: YES
\DRP08.$DSMSCM.ZDSMSCM 4>
STARTSCM: A new version of DSM/SCM has been installed and IPM6031 needs to
be run. You can either exit and run IPM6031
manually or continue and IPM6031 will be run for you.
Enter <CR> to continue or BREAK to exit.