H06.05 Software Installation and Upgrade Guide

Installing SWID, DSM/SCM PVU, and Planner
Interface (PI) Client Software
H06.05 Software Installation and Upgrade Guide—541762-003
B-12
Verify That SWID Is Installed
Verify That SWID Is Installed
This example shows the H02 product version of SWID. Use the VPROC command:
\DRP08.$SYSTEM.SYSTEM 101> vproc swid
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \DRP08 Date 13 FEB 2006, 14:41:43
Copyright 2004 Hewlett-Packard Development Company, L.P.
$SYSTEM.SYSTEM.SWID
Binder timestamp: 09NOV2005 21:52:32
Version procedure: T9298H02_20DEC2005_09SEP05H02
Target CPU: UNSPECIFIED
OCA timestamp: 09NOV2005 21:53:21
Recovery for Problems While Installing the
H01 Version of DSM/SCM
If you encounter problems while installing the H02 version of DSM/SCM, see the
DSM/SCM User’s Guide.
If NonStop Errors Are Displayed
See the DSM/SCM EMS Messages manual for information regarding the error
message and the DSM/SCM User’s Guide for information on deleting a Build/Apply
request.
Cancel Pending Build/Apply Requests
1. Select the request to be canceled.
2. Select Requests>Cancel request.
The cancel request action takes a few minutes to finish.
3. Using the Planner Interface, rename the old software inputs:
a. In the Software in Archive dialog box, select the software input.
b. Select File>Show software input description to display the SUT Description
dialog box.
c. In the Software name box, edit the software input name so that another
operator will know it is a DSM/SCM input that should not be used to build a
new DSM/SCM revision.
d. Click OK.
Note. If you inadvertently close the Status dialog box, reopen it by selecting Requests>
Requests list and then double-clicking the request.
Note. If you cannot cancel the Build request through the DSM/SCM Planner Interface, use
the DSM/SCM Target Interface (ZPHITI) to cancel the request. See the DSM/SCM User’s
Guide and online help
for more information.