H06.05 Software Installation and Upgrade Guide

Installing SWID, DSM/SCM PVU, and Planner
Interface (PI) Client Software
H06.05 Software Installation and Upgrade Guide—541762-003
B-14
Copy the ZDSMSCM Client File From the Host
Notepad opens the DSM/SCM initialization file. For example:
5. Make a note of the IP address and port number.
6. Close the dsmscm.ini file.
Copy the ZDSMSCM Client File From the Host
1. If you are using OutsideView, start an OutsideView session.
2. Select Session>Receive file to display the IXF Receive dialog box.
3. In the Host box, enter the host system name, and the volume and subvolume
where the file resides. Make $volume.ZDSMSCM the current subvolume.
4. In the File box, enter zdsmexe. The file zdsmexe appears in the Local area File
Name box. (Or, you can type zdsm.exe, and ignore Step 10.)
5. Under Download Path, click Browse, and locate and select the c:\dsmscm
directory. Click OK.
6. Under Options, verify that Binary is selected.
Note. If you are not using OutSideView on the PC that manages DSM/SCM:
1. On the NonStop operating system host system, make $
dsmscm_vol.ZDSMSCM the current
subvolume.
$DSM ZDSMSCM 86> fi zdsmexe
$DSM.ZDSMSCM
CODE EOF LAST MODIFIED OWNER RWEP PExt SExt
ZDSMEXE 0 2079732 23DEC2004 2:19 255,255 NUNU 4 28
2. Use the file transfer protocol (FTP) to download the ZDSMEXE file from the ZDSMSCM
subvolume on the NonStop host system to the DSMSCM directory on the PC.
3. Go to Step 10
and complete the download process.
VST005.vsd
IP Address
IP Port Number