H06.05 Software Installation and Upgrade Guide

Installing a SUT for the H06.05 RVU
H06.05 Software Installation and Upgrade Guide—541762-003
4-2
Back Up Important Files
•
Pause the hometerm configured for use by DSM/SCM Pathway servers and other
processes when DSM/SCM is running. The default hometerm is $ZHOME. See the
DSM/SCM User’s Guide for more information about the hometerm used by
DSM/SCM Pathway servers.
•
For those OSS products that are not managed by DSM/SCM, you must install them
manually using PINSTALL or COPYOSS.
•
A new processor type is introduced in H-series RVUs, NSE-A. On the initial H06.05
SUT the processor type NSE-A has been specified in the CONFTEXT file.
Back Up Important Files
•
If you have already done so, you might want to back up important files (such as,
TMF, NonStop SQL/MP, NonStop SQL/MX, and so forth). See Back Up Important
Files on page 3-1.
•
Drain the spooler and back up spooler control files.
Receive New Software Into the Archive
1. Start TMF and DSM/SCM if they are not already running. For example:
> TMFCOM START TMF
> VOLUME $dsmscm_vol.ZDSMSCM
> RUN STARTSCM
startscm
NOTICE: * If the hometerm chosen during INITENV, $zhome,
* is not currently in a paused state, STARTSCM and DSM/SCM
* server processes may hang indefinitely. Be sure this
* hometerm has been paused!
PATHWAY CONTROL FILE DATED: 18 APR 2005, 09:56:08
$Z038: WARN - *1079* SERVER CB-001, NO STATIC SERVERS DEFINED
$Z038: WARN - *1079* SERVER IS-001, NO STATIC SERVERS DEFINED
$Z038: WARN - *1079* SERVER MISERVER, NO STATIC SERVERS DEFINED
$Z038: SERVER OM-001, STARTED
$Z038: SERVER SM-001, STARTED
$Z038: SERVER SM-T-001, STARTED
$Z038: SERVER T9154-HELP-SERV, STARTED
$Z038: WARN - *1079* SERVER TA-001, NO STATIC SERVERS DEFINED
$Z038: WARN - *1079* SERVER TISERVER, NO STATIC SERVERS DEFINED
$Z038: WARN - *1079* SERVER US-001, NO STATIC SERVERS DEFINED
$Z038: TCP TCP-H, STARTED
$Z038: TCP TCP-T, STARTEDStart the DSM/SCM Planner Interface
2. Select Start>Programs>Dsm_scm>DSMSCM.
3. When the Logon dialog box appears, enter the user ID or alias and password and
click OK.