H06.05 Software Installation and Upgrade Guide

Installing a SUT for the H06.05 RVU
H06.05 Software Installation and Upgrade Guide—541762-003
4-12
Build and Apply the New Software Revision
2. Under Perform steps, select Build, apply & process snapshot.
3. In the Activation SYSnn: box, enter a unique number to create a new SYSnn
subvolume. The value nn must be a two-digit octal number in the range%00...%77.
You can issue a FILEINFO command at a TACL prompt to view the SYSnn
subvolumes that are currently on your system.
> fileinfo $system.*.osimage
4. Make a note of the new SYSnn. You will specify this SYSnn subvolume when:
•
Using the VPROC command to verify the location and version of your firmware
•
Specifying the location of firmware for a new RVU
•
Running ZPHIRNM
•
Loading a SUT for H06.05
5. Click Edit instructions to display the Planner Instructions dialog box.
6. Edit the instructions to provide the correct (new) SYSnn number, and then click
OK.
The Planner Instructions box closes.
7. Select the Scheduling, Output, SYSGEN, TSV Location, and File Placement
options and configure as appropriate for your system. (See the DSM/SCM User’s
Guide or the online help for more information about Build/Apply Request options.)
When completed, click OK.