H06.05.01 ReadMe

CONDITIONS:
This problem might occur when you use PMPROJECT CONVERT
<projectname> to convert projects from D30/D40 to H01.
LIKELIHOOD:
Certain.
DIRECT IMPACT:
Unable to convert D30/D40 project to H01.
SIDE-EFFECTS:
None.
WORKAROUND:
Use the command "PMPROJECT/release H01 /IMPORT <projectname> FROM
<catalog-subvol>" to migrate to the new version.
RECOVERY:
None.
o SNAX/XF (T9064)
Solution 10-051012-1987
SYMPTOMS:
In SNAX/APN, EMS message shows ELF LOGON ERROR with reason code
081a000 when the user logs out of application.
CONDITIONS:
This problem might occur when the following conditions are met:
1) SNAX service manager has the "NODETYPE" as EN.
2) The remote system is IBM VTAM host with APARS 0a0745 and
0a10695 installed.
3) The user logs out from remote IBM host.
LIKELIHOOD:
Likely, if the IBM APARS which supports Force termination is
installed.
DIRECT IMPACT:
Multiple retries are needed to log on to the application.
SIDE-EFFECTS:
None.
WORKAROUND / RECOVERY:
None.
o TACL (T9205)
Solution 10-051202-2991
SYMPTOMS:
The file ZTACSEGF is missing in subvolume ZSPISEGF.
CONDITIONS:
The problem occurs during installation of TACL SPR.
LIKELIHOOD:
Certain
Page
5
of
6