H06.06 Software Installation and Upgrade Guide

Overview of Installing the H06.06 RVU
H06.06 Software Installation and Upgrade Guide—542652-002
1-11
Managing Maintenance Entity Firmware for
Processor Switch and I/O Adapter Module (IOAM)
2. Right-click the ServerNet Switch Board object and select Actions.
3. In the Actions dialog box, select ME Firmware Update and click Perform Action.
4. Monitor the update.
5. Repeat for the processor switch on the other Internal ServerNet Fabric.
You can also check and update ME firmware using the OSM Low-Level Link. For more
information, see the OSM Low-Level Link online help.
For the Integrity NonStop NS1000 and Integrity NonStop NS14000 systems only:
Use the OSM Service Connection to update the ME firmware for processor switches.
1. Locate the ServerNet Switch Board on one Internal ServerNet Fabric (in the tree
pane, select System > Fabric Group > IOAM Enclosure > ServerNet Switch
Board).
2. Right-click the ServerNet Switch Board object and select Actions.
3. In the Actions dialog box, select ME Firmware Update and click Perform Action.
4. Monitor the update.
5. Repeat for the processor switch on the other Internal ServerNet Fabric.
Updating ME FPGA
Table 1-2 shows the current ME FPGA information for both processor switches and
IOAMs:
Use the OSM Service Connection to check and (if necessary) update ME FPGA just as
you did when Updating ME Firmware for both processor switches and IOAMs, except
update the ME FPGA firmware.
Note. T2805A01^AAF or later is required for the Integrity NonStop NS1000 and Integrity
NonStop NS14000 systems.
Table 1-2. Maintenance Entity (ME) FPGA
Product
Number Description Host FRU
Disk File
Name
Default
Location
Related
Information
T0437A01^AAB Maintenance
Entity (ME)
FPGA
ServerNet
Switch Board
(IOAM and
processor
switch)
SAM0437 SYSnn OSM online help