H06.07 Software Installation and Upgrade Guide

Loading the Previous RVU and Resuming Normal

Operations

H06.07 Software Installation and Upgrade Guide—543449-001

10-4

Completing the System Load (If Necessary)

Loading the processors with the CIIN file is usually automatic. However, if the

operating system loaded successfully into processor 0 or processor 1, but the

commands in the CIIN file do not reload all remaining processors, use the RELOAD

TACL commands. You must be super ID (255,255) to load the processors.

1. From the system console, log on to the system as a super-group user (255,nnn)

and enter:

> RELOAD *, PRIME

2. To load an individual processor or processors, enter:

> RELOAD nn

where nn is the processor number of the processor you want to reload.

If the reload is initiated successfully, this message appears in a startup TACL

window on the system console screen:

Install Specific OSS Files Using COPYOSS or PINSTALL (If

Necessary)

For those products that are not managed by DSM/SCM, you must install them using

COPYOSS or PINSTALL or both. For details, see Install Specific OSS Files Using

COPYOSS or PINSTALL on page 7-6.

Verifying the System Is Started

Verify that each processor is running the operating system:

1. From the Summary menu, select Processor Status.

2. The Processor Status dialog box should show each processor to be Executing

NonStop OS.