H06.07 Software Installation and Upgrade Guide

Contents
H06.07 Software Installation and Upgrade Guide—543449-001
v
10. Loading the Previous RVU and Resuming
Normal Operations
10. Loading the Previous RVU and Resuming Normal
Operations
Alerts 10-1
Halt the Processors 10-2
Loading the System 10-2
Completing the System Load (If Necessary) 10-4
Install Specific OSS Files Using COPYOSS or PINSTALL (If Necessary) 10-4
Verifying the System Is Started 10-4
Reverting to Previous NonStop Blade Complex Firmware 10-5
Reverting to H06.03 or H06.04 From H06.07 10-5
Reverting to H06.05 From H06.07 10-6
A. Using DSM/SCM to Install SPRs
Tools for Managing SPRs A-1
Scout for NonStop Servers A-1
DSM/SCM A-2
SPRNOTES A-2
Install SPRs With DSM/SCM A-2
Save the Current Configuration A-2
Determine the Current SYSnn A-3
Receive the SPR Into the DSM/SCM Archive A-4
Create a New Software Configuration That Includes the SPR A-5
Build the New Revision A-5
Print Operator Instructions From the Target Interface (ZPHITI) A-6
Run ZPHIRNM A-6
If Running INSTALL^TEMPLATES Is Required A-7
If a System Load Is Required
A-9
Halt the Processors
A-9
Perform a System Load A-10
Start Your Applications and Processes A-10
B. Installing SWID, DSM/SCM PVU, and Planner Interface (PI)
Client Software
Alerts B-1
Determine the Product Version of DSM/SCM on the Host System B-1
Determine the Latest SWID Product B-2
Determine the Product Version of DSM/SCM on the Client B-3
Copy (RESTORE) the H02 DSM/SCM Product Version to Disk (If Necessary) B-4
Receive the H02 SWID and DSM/SCM SPRs B-4