H06.07 Software Installation and Upgrade Guide

Installing a SUT for the H06.07 RVU
H06.07 Software Installation and Upgrade Guide—529400-001
4-19
Recovery for Problems Installing an H06.07 SUT or
SPRs
Recovery for Problems Installing an H06.07
SUT or SPRs
If you receive an error indication in the Requests, Status, or EMS Events windows, you
might have to reinitiate the Build/Apply. See the DSM/SCM Messages Manual to
determine the nature and severity of the problem.
Cancel Pending Build/Apply Requests
1. Select the request to be canceled.
2. Select Requests>Cancel request.
The cancel request action takes a few minutes to finish.
3. Using the Planner Interface, rename the old software inputs:
a. In the Software in Archive dialog box, select the software input.
b. Select File>Show software input description to display the SUT Description
dialog box.
c. In the Software name box, edit the software input name so that another
operator will know it is a DSM/SCM input that should not be used to build a
new software revision.
d. Click OK.
You must always use the new software input instead of the previously received
software input brought into the Archive.
Note. If you inadvertently close the Status dialog box, reopen it by selecting Requests>
Requests list and then double-clicking the request.
Note. If you cannot cancel the Build request through the DSM/SCM Planner Interface, use
the DSM/SCM Target Interface (ZPHITI) to cancel the request. See the DSM/SCM User’s
Guide and online help.