H06.08 Software Installation and Upgrade Guide

Contents
H06.08 Software Installation and Upgrade Guide—543573-001
v
10. Running ZPHIRNM to Reactivate the Previous
Software Revision
10. Running ZPHIRNM to Reactivate the Previous Software
Revision
Alerts 10-1
Drain the Spooler (Optional) 10-1
Run ZPHIRNM 10-2
Using PREVIEW Mode 10-2
Run ZPHIRNM 10-2
Verify That ZPHIRNM Ran Successfully 10-3
11. Loading the Previous RVU and Resuming Normal
Operations
Alerts 11-1
Halt the Processors 11-2
Loading the System 11-2
Completing the System Load (If Necessary) 11-3
Install Specific OSS Files Using COPYOSS or PINSTALL (If Necessary) 11-4
Verifying the System Is Started 11-4
Reverting to Previous NonStop Blade Complex Firmware 11-4
Reverting to H06.03 or H06.04 From H06.08 11-4
Reverting to H06.05 From H06.08 11-6
A. Using DSM/SCM to Install SPRs
Tools for Managing SPRs A-1
Scout for NonStop Servers A-1
DSM/SCM A-2
SPRNOTES A-2
Install SPRs With DSM/SCM
A-2
Save the Current Configuration
A-2
Determine the Current SYSnn A-3
Receive the SPR Into the DSM/SCM Archive A-4
Create a New Software Configuration That Includes the SPR A-5
Build the New Revision A-5
Print Operator Instructions From the Target Interface (ZPHITI) A-6
Run ZPHIRNM A-6
If Running INSTALL^TEMPLATES Is Required A-7
If a System Load Is Required A-9
Halt the Processors A-9
Perform a System Load A-10
Start Your Applications and Processes A-10