H06.09 Software Installation and Upgrade Guide

Overview of Installing the H06.09 RVU
H06.09 Software Installation and Upgrade Guide—544316-002
1-6
DSM/SCM and the H06.09 RVU
•
DSM/SCM and OSS
•
Upgrading the DSM/SCM Client (Planner Interface) and the T6031H02 PVU
•
Summary of Software Installation Tasks
•
Check or Alter the CONFTEXT File Before Installing an H06.09 SUT
DSM/SCM and the H06.09 RVU
•
The DSM/SCM H02 PVU (T6031H02) is supported for Integrity NonStop NS-series
servers only.
•
A new type of hardware platform and selectable option, TNS/E, for Integrity
NonStop NS-series servers has been added to the Planner Interface (PI) screens.
See the DSM/SCM User’s Guide for configuration information.
•
By default, the DSM/SCM H02 PVU is configured to manage OSS files. Check that
OSS is configured and started if DSM/SCM is set to manage OSS files. If not, the
Apply can fail.
•
CNFGINFO supports new system generation options for dynamic-link libraries
(DLLs).
•
Creating a SIT is not supported in H-series RVUs.
•
Similar to G-series RVUs, you might have to update both the client and server-side
SPRs. For H06.09, the PI screen displays G02/H02 for the client side and H02 for
the server side.
•
As of G06.27, you can manage an H-series target system from a G-series host
system. However, you cannot currently manage a G-series target system from an
H-series host.
•
When you upgrade the client and server SPRs for DSM/SCM, you must also
upgrade the SWID product (T9298H02) at the same time to avoid a fingerprint or
mismatched file problem. For the H06.09 RVU, SWID is already installed.
DSM/SCM and Public DLLs
In H-series RVUs, DSM/SCM manages and controls the distribution, installation, and
activation of public DLLs on Integrity NonStop NS-series servers similarly to the way
DSM/SCM handles public SRLs on NonStop S-series systems. Public DLLs are
installed on the H-series target systems in their own subvolume.
Starting with the G06.18 RVU, a new configuration file, A7CINFO, is introduced for
managing OSS files. To manage OSS files in H-series RVUs, use the T6031H01 or
later PVU. The corresponding client version or Planner Interface must also be installed.
For H06.09, the PVU for the client is T6031G02/H02 and the PVU for the server side is
T6031H02. (In H-series RVUs, the T6030 PV has been obsoleted and does not appear
on the SUT.)