H06.09 Software Installation and Upgrade Guide

Overview of Installing the H06.09 RVU
H06.09 Software Installation and Upgrade Guide—544316-002
1-12
Managing Firmware in a NonStop Blade Complex
5. Repeat for the processor switch on the other Internal ServerNet Fabric.
Updating ME FPGA
Table 1-2 shows the current ME FPGA information for both processor switches and
IOAMs:
Use the OSM Service Connection to check and (if necessary) update ME FPGA just as
you did when Updating ME Firmware for both processor switches and IOAMs, except
update the ME FPGA firmware.
Managing Firmware in a NonStop Blade Complex
Table 1-2. Maintenance Entity (ME) FPGA
Product
Number Description Host FRU
Disk File
Name
Default
Location
Related
Information
T0437A01^AAB Maintenance
Entity (ME)
FPGA
ServerNet
Switch Board
(IOAM and
processor
switch)
SAM0437 SYSnn OSM online help
T0789 VIO
enclosure
Maintenance
Entity (ME)
FPGA (for
NS1000, NS
14000 with
VIO
VIO enclosure
logic board
SAM0789 SYSnn Versatile I/O
Manual
Note. In TACL commands and event messages, you might see:
•
The term slice, which is equivalent to the term NonStop Blade Element (NSBE).
•
The term processor complex, which is equivalent to the term NonStop Blade Complex
(NSBC)
The OSM GUI now displays the newer Blade Complex and Blade Element terminology.
Note. For details specific to managing firmware in an NS1000 server, see the Updating Blade
Element Firmware in an NS1000 Server procedure in the Support and Services Library in NTL.