H06.10 Release Version Update Compendium

7 Hardware Products
HP Integrity NonStop NS3000AC Server
The HP Integrity NonStop NS3000AC server is AC powered entry-level Telco server that combines
HP Integrity rx2660 servers with the NonStop operating system. Each HP Integrity rx2660 server
contains a single Intel Itanium based processor and a ServerNet PCI adapter card to provide
ServerNet connectivity into the NonStop Value Architecture (NSVA). For information about the
NSVA, see the NonStop NS1000 Planning Guide. The NonStop NS3000AC server supports
configuration pairs of two or four processors. The system hardware is installed in 42U commercial
grade cabinets only.
H06.10Minimum RVU
HP NonStop Value Architecture (NSVA)Arcitecture
NSE-KProcessor type
4 GB or 8 GB per processorMain memory
4Maximum processors
2 or 4Supported processor configurations
2 required (one each for X and Y fabrics)Maximum Versatile I/O (VIO) enclosures
4Maximum NonStop S-series I/O enclosures
Supports 1 embedded adapter and 1 expansion adapter
in each VIO enclosure, and 4 I/O adapters per NonStop
S-series I/O enclosure for a total of 20 adapters
Maximum I/O adapters
64 (in NonStop S-Series I/O enclosures only)Maximum disk drives
SupportedRackmounted system console (optional)
Not supportedFibre Channel disk modules
Not supportedIOAM enclosures
Not supportedEnterprise Storage System (ESS)
Not supportedConnection to ServerNet cluster switch
Enclosures that house specific hardware components in an NonStop NS3000AC system include:
• Blade element (HP Integrity rx2660 server)
• Value I/O (VIO) Enclsoure
• NonStop S-Series I/O Enclosures and ServerNet adapters that support Ethernet and SS7
connectivity
• 5243 DAT unit
• 42xx disk drives, installed in NonStop S-Series I/O enclosures
• Rackmounted system console (optional)
• Maintenance switch
All NonStop NS3000AC server components are field-replaceable units (FRUs), and only HP-trained
service providers can service them.
HP Integrity NonStop NS3000AC Server 21