H06.11 Software Installation and Upgrade Guide

ManualsBrandsHP ManualsServerHP Integrity NonStop Release and Migration

Table 1-4 Minimum Required Firmware Versions for NS16000 and Mixed NS16000/NS16200

Systems (H06.11.01 RVU) (continued)

NotesProduct VersionModule File-nameFirmware Name

ISP1040 firmware is controller firmware for

legacy I/O or SCSI disks in G-series RVUs

T0480H01ISPFIRMWISP1040 firmware

BMC firmware is used for board and module

maintenance. Unlike the other Blade Element

firmware, BMC firmware updates only require

a reset of the BMC in the updated Blade

Element. When you perform the Switch to Use

Shadow Firmware Image After Reset action in

OSM (or through the guided procedure), the

BMC is instantly reset, and the Blade Element

starts running the new BMC firmware

immediately. The rest of the updated Blade

Element firmware does not become active

(running) until you reset the Blade Element.

T0661H01^AAAM0661Baseboard Management

Controller Firmware

(BMC)

Table 1-5 Minimum Required Firmware Versions for NS16000 and Mixed NS16000/NS16200

Systems (H06.11.02 RVU)

NotesProduct VersionModule File-nameFirmware Name

Contains HSS Main firmware.T0287H01^AAIHSSFIRMWHalted State Services

(HSS) firmware

Diskboot is used during a system load of an

Integrity NonStop NS-series server.

T2773H01DSKFIRMWDISKBOOT firmware

A firmware library based on the Intel Itanium

architecture. Any updates to SAL requires an

update of the entire IPFFIRMW firmware

module even if PAL has not changed.

T0287H01^AAIIPFFIRMWPAL/SAL firmware

Primitive state firmwareT0287H01^AAIPRMFIRMWPrimitive State

Firmware