H06.12 Software Installation and Upgrade Guide

c. Add a description describing the new software revision (such as H06.12 SUT) and click
OK.
d. In the Software in Archive window, select the H06.12 SUT that was just received into
the archive and click Copy to.
6. Click Continue when the Confirmation message appears:
Note that if there are any discrepancies between the set of products included in the previous
configuration and the set in your new configuration, a warning message appears listing any
products missing in the current configuration that were present in the previous configuration.
(These products are removed from the system by DSM/SCM during the Build/Apply of the
new configuration.)
You might receive a warning that certain OSS products are not DSM/SCM enabled. If this
is the case, install them using PINSTALL/COPYOSS. See the appropriate OSS manuals for
using PINSTALL and COPYOSS.
The Non SUT Products screen might appear:
The dialog box lists non-SUT products installed on the previous SYSnn that are not available
on the new configuration. For products that are available on the H06.12 SUT, see “IPs That
Become SUT Products on H-Series” (page 40).
Create a New Software Revision 81