H06.13 Software Installation and Upgrade Guide

This example shows the H02 product version of DSM/SCM after DSM/SCM has been activated.
(Bold lettering is used to show the VPROC command and the latest version):
\DRP08.$DSMSCM.ZDSMSCM 2> vproc cbexe
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \DRP08 Date 16 Jan 2007, 18:20:02
Copyright 2004 Hewlett-Packard Development Company, L.P.
$DSMSCM.ZDSMSCM.CBEXE
Binder timestamp: 28OCT2006 15:59:49
Version procedure: S7032H06^01OCT2004^SWARCCP^H01
Version procedure: T6031H02_01FEB2007_27OCT06H02
Target CPU: UNSPECIFIED
OCA timestamp: 27OCT2006 16:06:21
Privileged code: YES
\DRP08.$DSMSCM.ZDSMSCM 3> vproc taexe
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \DRP08 Date 16 JAN 2007, 18:20:13
Copyright 2004 Hewlett-Packard Development Company, L.P.
$DSMSCM.ZDSMSCM.TAEXE
Binder timestamp: 04DEC2006 16:31:25
Version procedure: S7032H06^01OCT2004^SWARCCP^H01
Version procedure: T6031H02_01FEB2007_27OCT06ABQ
Target CPU: UNSPECIFIED
OCA timestamp: 04DEC2006 16:36:28
Privileged code: YES
\DRP08.$DSMSCM.ZDSMSCM 4>
Verify That SWID Is Installed
This example shows the H02 product version of SWID. Use the VPROC command:
\DRP08.$SYSTEM.SYSTEM 101> vproc swid
VPROC - T9617H01 - (01 OCT 2004) SYSTEM \DRP08 Date 13 FEB 2006, 14:41:43
Copyright 2004 Hewlett-Packard Development Company, L.P.
$SYSTEM.SYSTEM.SWID
Binder timestamp: 09NOV2005 21:52:32
Version procedure: T9298H02_20DEC2005_09SEP05H02
Target CPU: UNSPECIFIED
OCA timestamp: 09NOV2005 21:53:21
Recovery for Problems While Installing the H02 Version of DSM/SCM
If you encounter problems while installing the H02 version of DSM/SCM, see the DSM/SCM
User’s Guide.
If NonStop Errors Are Displayed
See the DSM/SCM EMS Messages manual for information regarding the error message and the
DSM/SCM User’s Guide for information on deleting a Build/Apply request.
Cancel Pending Build/Apply Requests
NOTE: If you inadvertently close the Status dialog box, reopen it by selecting Requests> Requests
list and then double-clicking the request.
1. Select the request to be canceled.
2. Select Requests>Cancel request.
The cancel request action takes a few minutes to finish.
Recovery for Problems While Installing the H02 Version of DSM/SCM 131