H06.13 Software Installation and Upgrade Guide

For more information on OSM client applications, see the OSM Migration and Configuration
Guide or the online help available from within each application. To upgrade an existing system
console to the latest console software, see the NonStop System Console Installer Guide.
Using DSM/SCM With the H06.13 RVU
• “ DSM/SCM and the H06.13 RVU”
• “DSM/SCM and Public DLLs”
• “DSM/SCM and OSS”
• “Upgrading the DSM/SCM Client (Planner Interface) and the T6031H02 PVU”
• “Summary of Software Installation Tasks”
• “Check or Alter the CONFTEXT File Before Installing an H06.13 SUT ”
DSM/SCM and the H06.13 RVU
• The DSM/SCM H02 PVU (T6031H02) is supported for NonStop NS-series servers only.
• A new type of hardware platform and selectable option, TNS/E, for NonStop NS-series servers
has been added to the Planner Interface (PI) screens. See the DSM/SCM User’s Guide for
configuration information.
• By default, the DSM/SCM H02 PVU is configured to manage OSS files. Check that OSS is
configured and started if DSM/SCM is set to manage OSS files. If not, the Apply can fail.
• CNFGINFO supports new system generation options for dynamic-link libraries (DLLs).
• Creating a SIT is not supported in H-series RVUs.
• Similar to G-series RVUs, you might have to update both the client and server-side SPRs. For
H06.13, the PI screen displays G02/H02 for the client side and H02 for the server side.
• As of G06.27, you can manage an H-series target system from a G-series host system.
However, you cannot currently manage a G-series target system from an H-series host.
• When you upgrade the client and server SPRs for DSM/SCM, you must also upgrade the
SWID product (T9298H02) at the same time to avoid a fingerprint or mismatched file problem.
For the H06.13 RVU, SWID is already installed.
Using DSM/SCM With the H06.13 RVU 19