H06.13 Software Installation and Upgrade Guide

Install Node Interoperability SPRs
Node interoperability is the ability of the nodes (systems) in a network of NonStop operating system
nodes to communicate and interact with each other.
For details on maintaining interoperability between NonStop S-series and NonStop K-series systems,
see the Interactive Upgrade Guide 2.
Table 14 lists the specific SPRs required for compatibility and interoperability between NonStop
NS-series systems and NonStop S-series systems.
Table 14 Interoperability SPRs for NonStop NS-Series and NonStop S-Series Systems
Introduced in this RVUDescriptionProduct NameMinimum SPR
G06.26Required for ServerNet clusteringSNETMONT0294 AAP
G06.26Required for remote NEWPROCESS of
OCA objects
TACLT9205 ACF
G06.27Required to recognize OCA regionBinderT9621 ABB
G06.27Required to recognize OCA regionPDTSHARET9674 AAM
G06.27Required to recognize 800 filesVPROCT9617 AAY
G06.27Required to recognize OCA regionAxcelT9276 AAW
G06.27Required to prepare TNS code files to run
accelerated on a NonStop NS-series
platform
OCAT0448 AAA
Released post G06.26
and is backwards
compatible to G06.21.
Also, the G02 SPR
(installed with G06.27
and later) meets the
requirements.
Required to enable customers to receive
H-series SUTs, and install and manage
software on a NonStop NS-series target
system from a NonStop S-series host
(available to be applied to the G06.26
RVU and compatible to G06.21). The
functions in T6031ABP and T9298AAM
are included in the G02 DSM/SCM and
SWID product version updates released in
G06.27 and later G-series RVUs.
DSM/SCMT6031 ABP
G06.27Required on an S-series server to connect
directly to an H06.03 or later NonStop
NS-series server
Service Processor
firmware file
T1089 ABR
Install Node Interoperability SPRs 69