H06.13 Software Installation and Upgrade Guide

6. Click Continue when the Confirmation message appears:
Note that if there are any discrepancies between the set of products included in the previous
configuration and the set in your new configuration, a warning message appears listing any
products missing in the current configuration that were present in the previous configuration.
(These products are removed from the system by DSM/SCM during the Build/Apply of the
new configuration.)
You might receive a warning that certain OSS products are not DSM/SCM enabled. If this is
the case, install them using PINSTALL/COPYOSS. See the appropriate OSS manuals for using
PINSTALL and COPYOSS.
The Non SUT Products screen might appear:
The dialog box lists non-SUT products installed on the previous SYSnn that are not available
on the new configuration. For products that are available on the H06.13 SUT, see “IPs That
Become SUT Products on H-Series” (page 23).
You can retain non-SUT or third-party products from your current configuration into the new
revision:
• To include one or more products in the configuration to be built, select the products and
click Continue.
• To include all products, click Select All and click Continue.
The New software revision list now displays the new revision level (H06.13.nn). For
example:
76 Installing a SUT for the H06.13 RVU