H06.14 Software Installation and Upgrade Guide

ManualsBrandsHP ManualsServerHP Integrity NonStop Release and Migration

Table 5 Minimum Required Firmware Versions for NS14200 and Mixed NS14000/NS14200

Systems

Product DescriptionProduct LevelModule File NameFirmware Product

Contains HSS Main firmware.T0287H01^AAHHSSFWAAHHalted State Services

(HSS) Firmware

Diskboot is used during a system load of

a NonStop NS-series server.

T2773H01*DSKFIRMWDISKBOOT firmware

A firmware library based on the Intel

Itanium architecture. Any updates to SAL

require an update of the entire IPFFIRMW

firmware module even if PAL has not

changed.

T0287H01^AAHIPFFWAAHPAL/SAL Firmware

Primitive State Firmware.T0287H01^AAHPRMFWAAHPrimitive State Firmware

Controller firmware for legacy I/O or

SCSI disks in G-series RVUs.

T0480H01ISPFIRMWISP1040 Firmware

BMC firmware is used for board and

module maintenance. Unlike the other

Blade Element firmware, BMC firmware

updates require a reset of the BMC only

in the updated Blade Element. When you

perform the Switch to Use Shadow

Firmware Image After Reset action in

OSM (or through the guided procedure),

the BMC is instantly reset, and the Blade

Element starts running the new BMC

firmware immediately. The rest of the

updated Blade Element firmware does not

become active (running) until you reset the

Blade Element.

T0661H01^AABM0661AAABaseboard Management

Controller (BMC) M0661

Firmware

*The DSKFWAAB file for T2773H01^AAB is also present in the SYSnn subvolume, but is not required for the H06.14

RVU.

Table 6 Minimum Required Firmware Versions for NS16200 and Mixed NS16000/NS16200