H06.14 Software Installation and Upgrade Guide

ManualsBrandsHP ManualsServerHP Integrity NonStop Release and Migration

Install Node Interoperability SPRs

Node interoperability is the ability of the nodes (systems) in a network of NonStop operating system

nodes to communicate and interact with each other.

For details on maintaining interoperability between NonStop S-series and NonStop K-series systems,

see the Interactive Upgrade Guide 2.

Table 14, Table 15, and Table 16 list the specific SPRs required for compatibility and interoperability

between NonStop NS-series systems and NonStop S-series systems, between NonStop BladeSystems

and NonStop S-series systems, and between NonStop BladeSystems and NonStop NS-series

systems.

Table 14 Interoperability SPRs for NonStop NS-Series and NonStop S-Series Systems

Introduced in this RVUDescriptionProduct NameMinimum SPR

G06.26Required for ServerNet clustering*SNETMONT0294G08^AAP

G06.26Required for ServerNet clustering*SANMANT0502G08^AAN

G06.25Required for ServerNet clustering*OSM Service

Connection Suite

T0682G06^AAA

G06.26Required for remote NEWPROCESS of

OCA objects

TACLT9205 ACF

G06.27Required to recognize OCA regionBinderT9621 ABB

G06.27Required to recognize OCA regionPDTSHARET9674 AAM

G06.27Required to recognize 800 filesVPROCT9617 AAY

G06.27Required to recognize OCA regionAxcelT9276 AAW

G06.27Required to prepare TNS code files to run

accelerated on a NonStop NS-series

platform

OCAT0448 AAA

Released post G06.26

and is backwards

compatible to G06.21.

Also, the G02 SPR

(installed with G06.27

and later) meets the

requirements.

Required to enable customers to receive

H-series SUTs, and install and manage

software on a NonStop NS-series target

system from a NonStop S-series host

(available to be applied to the G06.26

RVU and compatible to G06.21). The

functions in T6031ABP and T9298AAM

are included in the G02 DSM/SCM and

SWID product version updates released in

G06.27 and later G-series RVUs.

DSM/SCMT6031 ABP

G06.27Required on an S-series server to connect

IOAME enclosures to S-series processor

enclosures.**

Service Processor

firmware file

T1089G06^ABR

*For more details, see the ServerNet Cluster Supplement for HP Integrity NonStop NS-Series Servers.

**For more details, see the NonStop S-Series Hardware Installation and FastPath Guide.

Table 15 Interoperability SPRs for NonStop BladeSystems and NonStop S-Series Systems