H06.15 Software Installation and Upgrade Guide

• G4SA. The OSM Service Connection displays G4SA firmware attributes and action under
the G4SA SAC object. To check or update G4SA firmware, locate and expand the G4SA,
then select its subcomponent G4SA SAC object. In the following example, the firmware
attributes show that the current firmware Version is the same as the available Default File
Version; no update is necessary. If the Compare State was Down-rev, you would use the
Firmware Update action to update the firmware:
For information on updating firmware, see the OSM online help on the OSM Multi-Resource Action
dialog box.
Table 4 shows the H-series ServerNet adapters that are supported in this RVU. Note that both the
FCSA and the G4SA are supported in G-series RVUs as well. For product levels, see the NonStop
Firmware Matrices document at: www.hp.com/go/nonstop-docs.
Table 4 H-Series ServerNet Adapters File Names and Locations
Related InformationToolDefault LocationFile NameComponentDescription
Fibre Channel
ServerNet Adapter
OSM Service
Connection or
SCF
SYSnn subvolumeI0630FCSAFibre Channel
ServerNet
Adapter (FCSA)
Flash firmware
(FCSA) Installation
and Support Guide
Fibre Channel
ServerNet Adapter
OSM Service
Connection or
SCF
SYSnn subvolumeC0612R00FCSAFCSA Flash Boot
firmware
(FCSA) Installation
and Support Guide
32 Managing Microcode and Firmware