H06.15 Software Installation and Upgrade Guide
Table 12 Interoperability SPRs for G-Series RVU Systems Connected through ServerNet to H-Series
RVU Systems (continued)
G06.25Required for ServerNet clustering*OSM Service
Connection Suite
T0682G06^AAA
*For more details, see the ServerNet Cluster Supplement for NonStop NS-Series Servers. To find out if your NonStop
server supports ServerNet clustering, see the planning guide for your NonStop server.
The SPRs in Table 13 facilitate software migration and software management operations between
nodes running G-series RVUs and nodes running H-series and J-series RVUs. Specifically:
• The T9621D30^ABB, T9674D30^AAM, T9276D30^AAW, and T0448G06^AAA SPRs
provide the option of using a G-series RVU system to construct objects that will ultimately run
on an H-series or J-series RVU system. Possible activities that can be performed in the G-series
RVU system include accelerating objects that will eventually run on an H-Series or J-series RVU
system. Once the objects have been properly constructed on the G-series RVU system, they
can be moved to the H-Series or J-series RVU system by whatever means preferred, for example,
by Expand, FTP, or magnetic tape. For more details, refer to the H-Series Application Migration
Guide.
• T6031G01^ABP provides the option to use DSM/SCM to manage software in an environment
composed of systems running different RVU series. The systems need not be connected through
Expand.
• T9617G03^AAY allows you to check the VPROC of H-series and J-Series object files that
have been copied to a G-series RVU system or in situations where a G-series RVU node is
used to manage software for a H-series or J-series RVU system. This functionality can also be
used to query the VPROC of a remote object file through Expand.
Table 13 SPRs for Software Migration and Software Management Operations Between G-Series,
H-Series and J-Series RVU-Based Systems
Introduced in this RVUDescriptionProduct NameMinimum SPR
G06.27Required to recognize 800 filesVPROCT9617G03^AAY
G06.27Required to recognize OCA regionBinderT9621D30^ABB
G06.27Required to recognize OCA regionPDTSHARET9674D30^AAM
G06.27Required to recognize OCA regionAxcelT9276D30^AAW
G06.27Required to prepare TNS code files to run
accelerated on a NonStop NS-series
platform
OCAT0448G06^AAA
Released post G06.26
and is backwards
Required to enable receiving H-series SUTs
and installing and managing software on
DSM/SCMT6031G01^ABP
compatible to G06.21.a NonStop NS-series target system from a
Also, the G02 SPRNonStop S-series host (available to be
(installed with G06.27applied to the G06.26 RVU and
and later) meets the
requirements.
compatible to G06.21). The functions in
T6031ABP and T9298AAM are included
in the G02 DSM/SCM and SWID product
version updates released in G06.27 and
later G-series RVUs.
Table 14 H-Series and J-Series RVUs Needing SPRs for Nodes to Interoperate with SQL/MX 2.3.4
(H06.20 and Later RVUs)
J-SeriesH-Series
J06.03 J06.04.00 J06.04.01 J06.04.02 J06.05.00
J06.05.01 J06.06.00 J06.06.01 J06.06.02 J06.07.00
J06.07.01 J06.08 J06.09
H06.10.00 H06.10.01 H06.11.00 H06.11.01
H06.11.02 H06.11.03 H06.12 H06.13 H06.14
H06.15.00 H06.15.01 H06.15.02 H06.16.00
68 Preparing to Upgrade the Server Software (Pre-installation Tasks)