H06.18 Software Installation and Upgrade Guide

Be sure to select the CLIM type for the type of CLIM you are configuring from the Mode of
operation pull-down menu. After entering the required information in the dialog box, press
Configure. Here is an example screen showing the CLIM preparation has successfully
completed:
4. Click Yes. The CLIM reboots.
5. If the system disk is a SAS disk and you have SAS disk enclosures that contain the system disks
(both primary and mirror), issue the following command on one of the storage CLIMs that
connect to the system disks:
lunmgr ––approve yesall
6. When you receive the Remote disconnected without sending a disconnect
message, click Ok.
Prepare the CLIMs 151