H06.19 Software Installation and Upgrade Guide

2. Close the Processor Status dialog box.
3. Verify that the NonStop operating system is working properly:
a. Check the startup TACL window to verify that the startup scripts completed successfully.
b. Check the startup event stream window and the startup TACL window for error messages.
4. Close the System Startup dialog box.
For more information on system loads, the NonStop Operations Guide.
7. (Optional) Updating the CLIM Firmware
If necessary, (if you did not update the CLIM firmware while the system was down), update the
CLIM firmware using the OSM System Console as described under “Managing CLIM Firmware”
(page 36). See the NonStop Firmware Matrices for firmware levels.
7. (Optional) Updating the CLIM Firmware 117