H06.21 Release Version Update Compendium

START/STOP/ABORT PROCESS $ZZCIP—
— START/STOP/ABORT CLIM/PROVIDER
— ADD/DELETE CLIM/PROVIDER/ROUTE
— SWITCH CLIM
The following sensitive commands are not audited:
— STOP/ABORT MON
— STOP/ABORT PROCESS for CIPSAM
— START/STOP/ABORT of CIPMAN/CIPMON/CIPSAM using Persistent Manager
($ZZKRN)
— STATS *, RESET
• To detect duplicate IPv4 addresses and MAC addresses in a subnet. When a duplicate IP or
MAC Address is detected, EMS Event 5230 will be created. One of these alarms will be
created:
— Duplicate CLIM IP Address: A duplicate IP address has been detected within the same
network and a potential loss of network connectivity for sockets using that source IP
address may occur. This alarm must be manually deleted.
— Duplicate CLIM MAC Address: A duplicate MAC address has been detected within
the same network and a potential loss of network connectivity through the interface
with that MAC address may occur. This alarm must be manually deleted.
Migration Considerations
None.
Fallback Considerations
None.
Telco CLIM Failover
As of H06.21, the CIP subsystem supports CLIM-to-CLIM failover for Telco CLIMs and a unique
Provider is not required. For more information, refer to the Cluster I/O Protocols (CIP) Configuration
and Management Manual.
Migration Considerations
None.
Fallback Considerations
None.
26 Networking Products