H06.25 Software Installation and Upgrade Guide

TSVs in old configuration .................. 130
TSVs in new configuration only ............. 0
TSVs in old configuration only ............. 1
TSVs shared by new and old configurations .. 129
TSVs processed in new config ............... 129
TSVs processed in old config (obsolete) .... 1
Files Processed:
Files processed in new configuration ........................... 4038
Files processed in new configuration only ...................... 0
Files processed in old configuration only ...................... 9
Files processed that are shared by new and old configuration ... 4038
Files processed & unchanged between new and old configuration .. 4038
Files processed in obsolete TSVs ............................... 14
Files renamed from real name to fabricated name ................ 23
Files renamed from fabricated name to real name ................ 0
Files renamed from real name to fabricated (ZPG) name .......... 0
Files renamed from fabricated name to fabricated (ZPG) name .... 0
-------
Total Number of files renamed .................................. 23
Number of files renamed back during undo processing ............ 0
Generic Process MODification(ZMODGP) is not required because no ZcccGP files
in the $SYSTEM.ZCNFDEFS TSV have changed.
Process Time:
Start ....... 1/29/05 16:43:20
End ......... 1/29/05 16:43:37
Elapsed ..... 0:00:16
Errors & Warnings:
Total Rename Errors ..... 0
Total Rename Warnings ... 0
ZPHIRNM for $SYSTEM($DRP07).SYS04 finished successfully
PREVIEW mode also reveals most errors that ZPHIRNM would encounter if it were run. If errors
are revealed, you can evaluate and correct them interactively.
The syntax for running ZPHIRNM in PREVIEW mode is (from the DSM/SCM subvolume):
> RUN ZPHIRNM [$vol.]SYSnn , PREVIEW [STRICT] [,option] ...
If you enter a RUN ZPHIRNM command with no arguments, ZPHIRNM help text displays information
about PREVIEW mode. For more information, see the NonStop Software Essentials User’s Guide
or DSM/SCM User's Guide.
Steps for Running ZPHIRNM
1. At a TACL prompt, enter this command from the DSM/SCM subvolume:
> RUN ZPHIRNM $vol.SYSnn
ZPHIRNM 109