H06.27 Software Installation and Upgrade Guide

7. Keep the Planner Interface open for the next task.
Build and Apply the New Software Revision
The Build process creates an activation package containing all the products listed in the new
software revision.
To avoid disrupting other system activity, schedule the Build to run at night and the Apply to run
immediately after the Build. See the DSM/SCM User’s Guide for information about scheduling the
Build/Apply to run at different times.
To build and apply the new software revision:
1. In the New software revision dialog box, click Build/Apply to display the options for your
Build/Apply.
It might take several minutes for DSM/SCM to assemble the build information. During this
time, the Build/Apply Request dialog box options and commands are dimmed and unavailable.
When the Build information is assembled, the Build/Apply Request dialog box is refreshed.
It displays default options and assigns a name to the Build/Apply request. For example:
102 Installing a SUT for This RVU Using the Planner Interface