H06.27 Software Installation and Upgrade Guide

Copy (RESTORE) the DSM/SCM Server, NonStop Software Essentials

Server, and SWID Product Versions from the SUT to Disk

CAUTION: The NonStop Software Essentials server product SPR (T0894H02) has been on the

SUT since H06.24. If you are preparing to install the SUT for H06.23 or an earlier H-series RVU,

you will not find the NonStop Software Essentials SPR on the SUT during the “Copy (RESTORE) the

DSM/SCM Server, NonStop Software Essentials Server, and SWID Product Versions from the SUT

to Disk” (page 173) procedure. Instead, you must use Scout to install the latest orderable NonStop

Software Essentials server SPR on your system when you copy the DSM/SCM and SWID SPRs

from the SUT.

To copy the H02 product version of DSM/SCM, NonStop Software Essentials server, and the

SWID product from this RVU to disk, at a TACL prompt, enter the RESTORE command:

>RESTORE/OUT $S.#nnn.DSM/$tape, ($*.E6031H02.*, *.E9298H02.*, E0894H02.*), VOL $DSMSCM, LISTALL

where nnn is the RVU number (H06) and where $tape is the name of the tape drive containing

this RVU.

The Windows (T0895) and Linux (T0996) versions of the NonStop Software Essentials clients are

independent products and must be installed as SPRs from Scout as described in “Install the Latest

Version of the NonStop Software Essentials Client” (page 179).

Receive the H02 DSM/SCM, NonStop Software Essentials Server, and

SWID SPRs

1. Start TMF and DSM/SCM if they are not already running:

2. > TMFCOM START TMF > VOLUME $dsmscm_vol.ZDSMSCM > RUN STARTSCM

3. Log on to NonStop Software Essentials.

4. Click the Receive Software link on the Home Page.

5. Under Software name, select Provided by planner and enter a name for the H02 DSM/SCM,

NonStop Software Essentials server, and SWID SPRs, up to 17 characters.

6. Click the Input Source tab. NonStop Software Essentials displays the input source options.

7. Select Subvolume.

8. In the Find/Add text box, enter each distribution subvolume for the DSM/SCM files that you

specified earlier in the RESTORE command:

$DSMSCM.E6031H02

$DSMSCM.E0894H02

$DSMSCM.E9298H02

Your Receive Software Input Source tab should look similar to this:

Copy (RESTORE) the DSM/SCM Server, NonStop Software Essentials Server, and SWID Product Versions from the SUT to

Disk

173