H06.27 Software Installation and Upgrade Guide

$Z03N: TCP TCP-T, STARTED
2. If necessary, press Enter to have STARTSCM run the IPM6031 TACL macro automatically. This
step takes several minutes.
STARTSCM: A new version of DSM/SCM has been installed and IPM6031
needs to be run. You can either exit and run IPM6031
manually or continue and IPM6031 will be run for you.
Enter <CR> to continue or BREAK to exit.
Verify that the SUT Version of DSM/SCM is Installed
To verify that the SUT version of DSM/SCM is now installed on your system, use the VPROC
command to display the product version of TAEXE (Apply product of DSM/SCM) and CBEXE (Build
product of DSM/SCM). At a TACL prompt, enter:
At a TACL prompt, enter:
> VOLUME $dsmscm_vol.ZDSMSCM
> VOLUME TAEXE
> VPROC CBEXE
The VPROC command should now display the DSM/SCM SPR version T6031H02^ADC.
Verify that the SUT or Scout Version of the NonStop Software Essentials Server is
Installed
To verify that the latest version of NonStop Software Essentials server SPR is now installed on your
system, either copied from the SUT or loaded from Scout, enter at the TACL prompt:
> VPROC T0894
> VPOROC $SYSTEM.ZNSE.HTTPSRVR
The VPROC command should now display the NonStop Software Essentials server version
T0894H02^AAB.
Verify that the SUT Version of SWID Is Installed
To verify that the SUT version of SWID is now installed on your system, use the VPROC command
at the TACL prompt:
> \DRP08.$SYSTEM.SYSTEM 101> vproc swid
The VRPROC command should now display the SWID version T9298H02^AAV.
Recovery for Problems While Installing the H02 Version of DSM/SCM
If you encounter problems while installing the H02 version of DSM/SCM, see the DSM/SCM
User’s Guide.
If NonStop Errors Are Displayed
See the DSM/SCM Messages manual for information regarding the error message and the
DSM/SCM User’s Guide for information on deleting a Build/Apply request.
Cancel Pending Build/Apply Requests
NOTE: If you inadvertently close the Status page, reopen it by clicking on the Request Name link
on the Request List page.
Click the Cancel button.
The cancel request action takes a few minutes to finish.
178 Copying the DSM/SCM, NonStop Software Essentials, and SWID SPRs from the SUT Using NonStop Software Essentials