H06.27 Software Installation and Upgrade Guide

> RUN STARTSCM
These messages appear:
8> startscm
DSM/SCM Process Startup Function - STARTSCM - T6031H02 - (31MAR2003)
Copyright Hewlett Packard Development Company L.P. 1993-2003
\
NOTICE: * If the hometerm chosen during INITENV, $zhome,
* is not currently in a paused state, STARTSCM and DSM/SCM
* server processes may hang indefinitely. Be sure this
* hometerm has been paused!
Because the $ZHOME reliable home-term process is not an interactive process and is always
paused, no action is necessary.
PATHWAY CONTROL FILE DATED: 21 APR 2006, 03:52:16
$Z03N: WARN - *1079* SERVER CB-001, NO STATIC SERVERS DEFINED
$Z03N: WARN - *1079* SERVER IS-001, NO STATIC SERVERS DEFINED
$Z03N: WARN - *1079* SERVER MISERVER, NO STATIC SERVERS DEFINED
$Z03N: SERVER OM-001, STARTED
$Z03N: SERVER SM-001, STARTED
$Z03N: SERVER SM-T-001, STARTED
$Z03N: SERVER T9154-HELP-SERV, STARTED
$Z03N: WARN - *1079* SERVER TA-001, NO STATIC SERVERS DEFINED
$Z03N: WARN - *1079* SERVER TISERVER, NO STATIC SERVERS DEFINED
$Z03N: WARN - *1079* SERVER US-001, NO STATIC SERVERS DEFINED
$Z03N: TCP TCP-H, STARTED
$Z03N: TCP TCP-T, STARTED
2. If necessary, press Enter to have STARTSCM run the IPM6031 TACL macro automatically. This
step takes several minutes.
STARTSCM: A new version of DSM/SCM has been installed and IPM6031 needs to be run.
You can either exit and run IPM6031
manually or continue and IPM6031 will be run for you.
Enter <CR> to continue or BREAK to exit.
Verify that the Correct SPR of DSM/SCM Is Installed
To verify that the appropriate product version of DSM/SCM is currently installed on your system,
use the VPROC command to display the product version of TAEXE (Apply product of DSM/SCM)
and CBEXE (Build product of DSM/SCM). At a TACL prompt, enter:
> volume $dsmscm_vol.ZDSMSCM
> vproc taexe
> vproc cbexe
The DSM/SCM version for this RVU is T6031H02^ADC.
Verify that SWID Is Installed
This example shows the H02 product version of SWID. Use the VPROC command. For example:
\DRP08.$SYSTEM.SYSTEM 101> vproc swid
The SWID version for this RVU is T9298H02^AAV.
186 Installing SWID, DSM/SCM PVU, and Planner Interface (PI) Client Software