H06.27 Software Installation and Upgrade Guide

5. In the Contents pane, double-click dsmscm.ini.
Notepad opens the DSM/SCM initialization file. For example:
6. Make a note of the IP address and port number.
7. Close the dsmscm.ini file.
Copy the ZDSMSCM Client File From the Host
1. From the Windows Start menu, select Run and enter the command CMD .
An example response is:
Microsoft Windows XP [Version 5.1.2600]
(C) copyright 1985–2001 Microsoft Corp.
C:\Documents and Settings\Administrator
>
2. Enter: cd c:\
3. If a DSMSCM directory does not exist, enter the following at the C:\ prompt to create it:
mkdir DSMSCM
4. At the C:\ prompt, enter: cd DSMSCM
5. Enter: ftp <ip-address>, where ip-address is the IP address of your NonStop server.
For example, ftp 192.231.36.10.
An example response is:
Connected to 192.231.36.10.
220 osmlanx FTP SERVER T9552H02 (Version H02 TANDEM 03MAY2006) ready
User (192.231.36.10: (none)): super.super
331 Password required for SUPER.SUPER.
6. Enter the super.super password.
An example response is:
230 User SUPER.SUPER logged in. OSS API enabled
7. At the ftp> prompt, enter: quote guardian.
An example response is:
257 Guardian API enabled
8. Enter: bin.
An example response is:
200 Type set to I
9. Enter: cd $DSMSCM.ZDSMSCM.
An example response is:
188 Installing SWID, DSM/SCM PVU, and Planner Interface (PI) Client Software