H06.27 Software Installation and Upgrade Guide

DSM/SCM and This RVU
CAUTION: Before you install the SUT, you must copy the SUT versions of the DSM/SCM server
and client products to your host system. When you copy the server and client SPRs for DSM/SCM,
you must also upgrade the SWID product (T9298H02) at the same time to avoid a fingerprint or
mismatched file problem. If you are upgrading DSM/SCM paired with NonStop Software Essentials,
see “Copying the DSM/SCM, NonStop Software Essentials, and SWID SPRs from the SUT Using
NonStop Software Essentials” (page 171) for the detailed instructions. If you are upgrading
DSM/SCM paired with the Planner Interface, see “Installing SWID, DSM/SCM PVU, and Planner
Interface (PI) Client Software ” (page 180) for the detailed instructions.
• The DSM/SCM H02 PVU (T6031H02) is supported.
• A new type of hardware platform and selectable option, TNS/E, has been added to the
Planner Interface (PI) screens. See the DSM/SCM User’s Guide for configuration information.
• By default, the DSM/SCM H02 PVU is configured to manage OSS files. Check that OSS is
configured and started if DSM/SCM is set to manage OSS files. If not, the Apply can fail.
• CNFGINFO supports new system generation options for dynamic-link libraries (DLLs).
• Creating a SIT is not supported in H-series RVUs.
• Similar to G-series RVUs, you might have to update both the client and server-side SPRs. The
PI screen displays G02/H02 for the client side and H02 for the server side.
• As of G06.27, you can manage an H-series target system from a G-series host system.
WARNING! If an H06.12 or later host system is used to perform DSM/SCM builds for a target
system that is running a release prior to H06.12, you must include the appropriate T0431 (OSBUILD)
SPR for that target system before performing the build. If this is not done, then the DSM/SCM
Sysgen (OSBUILD) will fail. The build will complete successfully if it is being done for an H06.12
or later system.
The appropriate T0431 SPRs are:
Target NonStop System RVUSPR
H06.10 and H06.11T0431H01^AAK
H06.09T0431H01^AAH
H06.08T0431H01^AAN
H06.07T0431H01^AAM
H06.05 and H06.06T0431H01^AAL
Any H06.12 or later RVU attempting to build an RVU prior to H06.12 must install these SPRs.
Using DSM/SCM and NonStop Software Essentials With This RVU 19