H06.27 Software Installation and Upgrade Guide

such as Expand over IP and ServerNet Cluster. See the NonStop Networking Overview for more
information about and diagrams of NonStop platform interoperability.
In addition to interoperability issues for nodes connected through Expand, there are software
migration and software management issues to consider, such as accelerating TNS object files on
a system running an RVU series for posterior use in a system running another RVU series, DSM/SCM
software management in an environment composed of systems running different RVU series, and
moving objects built on a system running an RVU series to a system running another RVU series
by means of Expand, FTP, or media such as magnetic tapes.
NOTE: This manual does not list the SPRs needed for BladeCluster Solution interoperability. For
specific SPRs required for BladeCluster Solution, see the BladeCluster Solution Manual.
Table 11 lists a specific SPR that must be installed on systems running G-Series RVUs if you want
the functionality it makes available through Expand-connected H-series or J-series RVU systems.
Table 11 Interoperability SPR for G-Series RVU Systems Connected Through Expand to H-Series or
J-Series RVU Systems
Introduced in this RVUDescriptionProduct NameMinimum SPR
G06.26Required for remote NEWPROCESS of
OCA objects*
TACLT9205D46^ACF
*T9205D46^ACF is required only if you want the functionality it provides.
Table 12 lists the specific SPRs that must be installed on systems running H-Series RVUs for
compatibility and interoperability through a ServerNet Cluster with systems running J-Series RVUs.
Table 12 Interoperability SPRs for H-Series RVU Systems Connected through ServerNet to J-Series
RVU Systems
Introduced in this RVUDescriptionProduct NameMinimum SPR
H06.14Required for ServerNet clustering*SNETMONT0294H01^AAW
H06.14Required for ServerNet clustering*SANMANT0502H01^AAW
*For more details, see the ServerNet Cluster Supplement for HP Integrity NonStop BladeSystems. To find out if your
NonStop server supports ServerNet clustering, see the planning guide for your NonStop server.
Table 13 lists the specific SPRs that must be installed on systems running G-Series RVUs for
compatibility and interoperability through a ServerNet Cluster with systems running H-Series RVUs.
Table 13 Interoperability SPRs for G-Series RVU Systems Connected through ServerNet to H-Series
RVU Systems
Introduced in this RVUDescriptionProduct NameMinimum SPR
G06.26Required for ServerNet clustering*SNETMONT0294G08^AAP
G06.26Required for ServerNet clustering*SANMANT0502G08^AAN
G06.25Required for ServerNet clustering*OSM Service
Connection Suite
T0682G06^AAA
*For more details, see the ServerNet Cluster Supplement for NonStop NS-Series Servers. To find out if your NonStop
server supports ServerNet clustering, see the planning guide for your NonStop server.
The SPRs in Table 14 facilitate software migration and software management operations between
nodes running G-series RVUs and nodes running H-series and J-series RVUs. Specifically:
• The T9621D30^ABB, T9674D30^AAM, T9276D30^AAW, and T0448G06^AAA SPRs
provide the option of using a G-series RVU system to construct objects that will ultimately run
on an H-series or J-series RVU system. Possible activities that can be performed in the G-series
RVU system include accelerating objects that will eventually run on an H-Series or J-series RVU
Install Node Interoperability SPRs 79