J06.05 Software Installation and Upgrade Guide

About This Document
This guide describes:
• Upgrading the initial J06.05 RVU through the use of SUT refreshes, if necessary.
• Falling back to a previous SYSnn.
Supported RVUs
This manual supports the J06.05.00 RVU and all subsequent J06.05.nn RVUs unless otherwise
noted.
Intended Audience
This guide is written for operations staff and support personnel and requires a working knowledge
of Windows Server 2003 or Windows Server 2008, OSM client and server components, system
console software, NonStop Software Essentials, DSM/SCM, Target Interface (ZPHITI), and ZPHIRNM
applications.
New and Changed Information in This Edition
This edition includes these changes:
• Added references to Support Note SN 12023 (OSM application issues with Administrator
user on NSC).
• New art in the steps for loading a system.
• Changes to falling back to previous CLIM software in “Falling Back on the CLIMs, Loading
the Previous RVU, and Resuming Normal Operations ” (page 104).
New and Changed Information in Previous Editions
Changes from previous editions in addition to this one are indicated by change bars and include:
• Support for the DHCP DNS configuration wizard.
• Support for NonStop Software Essentials.
• Changes to privilege requirements for running SSOCLIM after RVU and CLIM fallback.
Changes from previous editions in addition to this one are indicated by change bars.
What This Guide Does Not Cover
• Changes from G-series RVUs. Differences between G-series and J-series RVUs are the same
as for H-series RVUs. For information on differences between G-series and H-series RVUs, see
the H06.nn Software Installation and Upgrade Guide.
• System migration planning. System-wide issues involved in migrating to the latest J-series RVU
are covered in:
◦ The J06.nn Release Version Update Compendium for this RVU
◦ The Interactive Upgrade Guide 2 (IUG2)
• Installing a J-series RVU from a host system to a remote or separate network-connected target
system using an Expand connection or tape. See the DSM/SCM User’s Guide for information
on setting up target systems.
• Installing and configuring OSS.
10