J06.05 Software Installation and Upgrade Guide

Threshold 86959 CPU pages
* Default swapfile extents may not be fully allocated.
Status of $SYSTEM.ZSYSSWAP.SWAP02
CPU 2
CPU Pages: Total 102305* Reserved 6361 Available 95944
Peak CPU Pages ever reserved 7280
Threshold 86959 CPU pages
* Default swapfile extents may not be fully allocated.
Status of $SYSTEM.ZSYSSWAP.SWAP03
CPU 3
CPU Pages: Total 102305* Reserved 5242 Available 97063
Peak CPU Pages ever reserved 6863
Threshold 86959 CPU pages
* Default swapfile extents may not be fully allocated..
Install Node Interoperability SPRs
Node interoperability is the ability of the nodes (systems) in an Expand network to communicate
and interact with each other. An Expand network can be interconnected using various technologies
such as Expand over IP and ServerNet Cluster. See the NonStop Networking Overview for more
information about and diagrams of NonStop platform interoperability.
In addition to interoperability issues for nodes connected through Expand, there are software
migration and software management issues to consider, such as accelerating TNS object files on
a system running an RVU series for posterior use in a system running another RVU series, DSM/SCM
software management in an environment composed of systems running different RVU series, and
moving objects built on a system running an RVU series to a system running another RVU series
by means of Expand, FTP, or media such as magnetic tapes.
NOTE: This manual does not list the SPRs needed for BladeCluster Solution interoperability. For
specific SPRs required for BladeCluster Solution, see the BladeCluster Solution Manual.
These SPRs must be installed on systems running G-series RVUs if you want the functionality it makes
available through Expand-connected H-series or J-series RVU systems.
Table 11 Interoperability SPRs for G-Series RVU Systems Connected Through Expand to H-Series
or J-Series RVU Systems
Introduced in this RVUDescriptionProduct NameMinimum SPR
G06.26Required for remote NEWPROCESS of
OCA objects*
TACLT9205D46^ACF
*T9205D46^ACF is required only if you want the functionality it provides.
These SPRs must be installed on systems running H-series RVUs for compatibility and interoperability
through a ServerNet Cluster with systems running J-Series RVUs.
Table 12 Interoperability SPRs for H-Series RVU Systems Connected through ServerNet to J-Series
RVU Systems
Introduced in this RVUDescriptionProduct NameMinimum SPR
H06.14Required for ServerNet clustering*SNETMONT0294H01^AAW
H06.14Required for ServerNet clustering*SANMANT0502H01^AAW
*For more details, see the ServerNet Cluster Supplement for HP Integrity NonStop BladeSystems. To find out if your
NonStop server supports ServerNet clustering, see the planning guide for your NonStop server.
44 Preparing to Upgrade the Server Software (Preinstallation Tasks)