J06.09 Software Installation and Upgrade Guide

a. In the Virtual CD/DVD-ROM area of the dialog box (1 in the following figure), select the
image to which you want to reimage or downgrade (2 in the following figure).
NOTE: If you do not have the correct image on the console, install the image from a
CLIM Software DVD onto the console by following the procedures in the Cluster I/O
Protocols (CIP) Configuration and Management Manual.
1
Use this area (Virtual CD/DVD-ROM) of the applet screen.
2
This is where you specify the local image file.
3
This is where you click Connect.
b. Click Connect beside the Local Media Drive field (3 in the above figure). The DVD image
is enclosed with the Green Box, similar to this screen:
116 Falling Back on the CLIMs, Loading the Previous RVU, and Resuming Normal Operations