J06.09 Software Installation and Upgrade Guide

Restart Applications
You can now start your application software. Follow your site’s procedures for executing the system
configuration and startup (command) files to accomplish this.
DSM/SCM is often started automatically by a system command file. If not, you must start DSM/SCM
manually as described next.
Before Starting DSM/SCM
1. Check that TMF is started:
> TMFCOM STATUS TMF
2. Verify your current configuration against the cold start configuration in PATHHOST (or
PATHTARG) to check that the current configuration reflects all changes you have made.
3. If necessary, run the PATHCOLD macro from the ZDSMSCM subvolume to cold start the
Pathway configuration.
Start DSM/SCM
1. Run the STARTSCM macro from the ZDSM/SCM subvolume to start DSM/SCM:
> RUN STARTSCM
These messages appear:
8> startscm
DSM/SCM Process Startup Function - STARTSCM - T6031H02 - (31MAR2003)
Copyright Hewlett Packard Development Company L.P. 1993-2003
\
NOTICE: * If the hometerm chosen during INITENV, $zhome,
* is not currently in a paused state, STARTSCM and DSM/SCM
* server processes may hang indefinitely. Be sure this
* hometerm has been paused!
Because the $ZHOME reliable home-term process is not an interactive process and is always
paused, no action is necessary.
PATHWAY CONTROL FILE DATED: 21 APR 2006, 03:52:16
$Z03N: WARN - *1079* SERVER CB-001, NO STATIC SERVERS DEFINED
$Z03N: WARN - *1079* SERVER IS-001, NO STATIC SERVERS DEFINED
$Z03N: WARN - *1079* SERVER MISERVER, NO STATIC SERVERS DEFINED
$Z03N: SERVER OM-001, STARTED
$Z03N: SERVER SM-001, STARTED
$Z03N: SERVER SM-T-001, STARTED
$Z03N: SERVER T9154-HELP-SERV, STARTED
$Z03N: WARN - *1079* SERVER TA-001, NO STATIC SERVERS DEFINED
$Z03N: WARN - *1079* SERVER TISERVER, NO STATIC SERVERS DEFINED
$Z03N: WARN - *1079* SERVER US-001, NO STATIC SERVERS DEFINED
$Z03N: TCP TCP-H, STARTED
$Z03N: TCP TCP-T, STARTED
2. If necessary, press Enter to have STARTSCM run the IPM6031 TACL macro automatically. This
step takes several minutes.
STARTSCM: A new version of DSM/SCM has been installed and IPM6031 needs to be run.
You can either exit and run IPM6031
Restart Applications 151