J06.09 Software Installation and Upgrade Guide

• G4SA. The OSM Service Connection displays G4SA firmware attributes and action under
the G4SA SAC object. To check or update G4SA firmware, locate and expand the G4SA,
then select its subcomponent G4SA SAC object. In the following example, the firmware
attributes show that the current firmware Version is the same as the available Default File
Version; no update is necessary. If the Compare State was Down-rev, you would use the
Firmware Update action to update the firmware:
For information on updating firmware, see the OSM online help on the OSM Multi-Resource Action
dialog box.
NOTE: Firmware levels for each component are located in the NonStop Firmware Matrices
document.
Table 6 H-Series ServerNet Adapters File Names and Locations
ToolDefault LocationFile NameComponentFirmware Name
Fibre Channel
ServerNet Adapter
OSM Service
Connection or
SCF
SYSnn subvolumeI0630FCSAFCSA Flash
firmware
(FCSA) Installation
and Support Guide
Fibre Channel
ServerNet Adapter
OSM Service
Connection or
SCF
SYSnn subvolumeC0612R00FCSAFCSA Flash Boot
firmware
(FCSA) Installation
and Support Guide
Gigabit Ethernet
4–Port Adapter
OSM Service
Connection or
SCF
SYSnn subvolumeC0612R00G4SAG4SA Boot
firmware
Installation and
Support Guide
Managing ServerNet Adapter Firmware 27