J06.12 Software Installation and Upgrade Guide

DSM/SCM and This RVU
CAUTION: Before you install the SUT, you must copy the SUT versions of the DSM/SCM server
and client products to your host system. When you copy the server and client SPRs for DSM/SCM,
you must also upgrade the SWID product (T9298H02) at the same time to avoid a fingerprint or
mismatched file problem. If you are upgrading DSM/SCM paired with NonStop Software Essentials,
see “Copying the DSM/SCM, NonStop Software Essentials, and SWID SPRs from the SUT Using
NonStop Software Essentials” (page 142) for the detailed instructions. If you are upgrading
DSM/SCM paired with the Planner Interface, see “ Copying the DSM/SCM and SWID SPRs from
the SUT Using the Planner Interface” (page 150) for the detailed instructions.
Also be aware of the following:
• A new type of hardware platform and selectable option, TNS/E, has been added to the
Planner Interface screens. See the DSM/SCM User’s Guide for configuration information.
• By default, the DSM/SCM H02 PVU is configured to manage OSS files. Check that OSS is
configured and started if DSM/SCM is set to manage OSS files. If not, the Apply can fail.
• CNFGINFO supports system generation options for DLLs.
• Creating a SIT is not supported in J-series RVUs.
OSBUILD SPR
WARNING! If a J06.03 or later host system is used to perform DSM/SCM builds for a target
system that is running an H-series release prior to H06.12, you must include the appropriate T0431
(OSBUILD) SPR for that target system before performing the build. If this is not done, then the
DSM/SCM Sysgen (OSBUILD) will fail. The build will complete successfully if it is being done for
an H06.12 or later system.
The appropriate T0431 SPRs are:
Target NonStop System RVUSPR
H06.10 and H06.11T0431H01^AAK
H06.09T0431H01^AAH
H06.08T0431H01^AAN
H06.07T0431H01^AAM
H06.05 and H06.06T0431H01^AAL
Any J-series RVU attempting to build an H-series RVU prior to H06.12 must install these SPRs.
DSM/SCM and Public DLLs
DSM/SCM manages and controls the distribution, installation, and activation of public DLLs in
J-series RVUs the same way as H-series RVUs. Public DLLs are installed on the H-series and J-series
target systems in their own subvolume.
To manage OSS files in J-series RVUs, use the T6031H02 or later SPR. The corresponding client
version of NonStop Software Essentials or the Planner Interface must also be installed. For this
RVU, the SPR for the NonStop Software Essentials client is T0895V02^AAC for Windows and
T0996V92^AAC for Linux. The DSM/SCM SPR for the server side is T6031H02^ADD. The SPR
for the NonStop Software Essentials server is T0894H02^AAE.
Using DSM/SCM and NonStop Software Essentials With This RVU 17