J06.13 Release Version Update Compendium

• You cannot use the EMULATEFSF option with the VOLUMEMODE restore option.
• The option is known to work best with small files, less than 3 MB file size, in a reasonably
small sized backup image.
With very large average file sizes of about 30 MB and a huge total backup size greater than 19
GB, EMULATEFSF would have negative performance impact.
Migration Considerations
None.
Fallback Considerations
None.
New NonStop BladeSystem Memory Option Available for the NB54000c
and MN54000c-cg Platforms
For the J06.13 RVU, the NonStop NB54000c and NB54000c-cg platforms will support a new
server blade that has a memory configuration of 64 GB. Previous server blade configurations
supported in the J06.11 and J06.12 RVUs of 16, 24, 32, and 48 GB will continue to be available
in J06.13.
Although the 64 GB memory configuration uses a different memory DIMM size than the smaller
memory configurations, all NB54000c and NB54000c-cg server blades with less than 64 GB of
memory can be upgraded to 64 GB of memory. For instructions on upgrading a server blade to
the 64 GB memory confirmation, have your service provider refer to the latest version of the
Replacing a FRU in a NonStop BladeSystem NB54000c or NB54000c-cg Server Blade or Adding
Memory or a Server Blade service procedure.
Migration Considerations
A server blade with 64 GB memory is supported only in J06.13 and later RVUs. The system must
first be upgraded to a J06.13 or later RVU before upgrading any server blade to 64 GB of memory
or adding a server blade with 64 GB of memory.
Fallback Considerations
Before falling back to J06.11 or J06.12, all blades in the system with a 64 GB memory configuration
must first be downgraded to one of the memory configurations supported by the earlier RVUs.
New NonStop BladeSystem Memory Option Available for the NB54000c and MN54000c-cg Platforms 19