J06.16 Software Installation and Upgrade Guide

b. Click the Output tab to view the default output values.
c. Enter the appropriate values in the data fields.
NOTE: The alternate name for the $SYSTEM drive defaults to $FC1 for fibre channel
drives or $SCSI for SCSI drives. If this default has been changed, then the target volume
specified in NonStop Software Essentials for new subvolumes must reflect this change.
4. Click OK to return to the Configuration Revisions page.
5. Click the Create or Edit in the New Revision group box.
The new software revision page loads into the work panel and this page lists the products in
the last software revision that was built for the target system. It might take several minutes.
a. In the New software revision dialog box, click Edit Revision Notes.
b. A Revision Notes text box containing existing revision notes appears.
c. Add a description describing the new software revision (such as J06.16SUT) and click
OK.
d. Click on SUTs in the source tree to get the list of SUTs loaded into the source table. Select
the SUT just received into the archive and click Copy to.
6. Click Continue when the Confirmation message appears:
Create a New Software Revision 63