J06.17 Software Installation and Upgrade Guide

• G4SA. G4SAs can only be installed in an IOAM. Firmware is preinstalled on G4SAs in a
new NonStop BladeSystem. You might need to update the firmware using either OSM or SCF.
◦ Use the OSM Service Connection to display G4SA firmware attributes and action under
the G4SA SAC object. To check or update G4SA firmware using the OSM Service
Connection, locate and expand the G4SA, then select its subcomponent G4SA SAC
object.
◦ In the following example, the firmware attributes show that the current firmware Version
is the same as the available Default File Version; no update is necessary. If the Compare
State was Down-rev, you would use the Firmware Update action to update the firmware:
• CCSA. CCSA-2 adapters in a Nonstop S-series I/O enclosure provide SS7 connectivity to
NonStop BladeSystems via IOMF2 CRU to c7000 ServerNet switch connections. Firmware
is preinstalled on CCSAs in a NonStop S-series I/O enclosure. You might need to update the
firmware using either OSM or SCF.
◦ The OSM Service Connection displays CCSA firmware attributes and action under the
CCSA SAC object.
◦ To check or update CCSA firmware using the OSM Service Connection, locate and
expand the CCSA, then select its subcomponent CCSA SAC object.
Managing ServerNet Adapter Firmware 27