NonStop Firmware Matrices

ChangesDateVersion
• Corrected typo in the SPR revisions of the following product in “SUT Delivered
NonStop Firmware Levels for J06.09 and H06.20” (page 37):
◦ SWAN and SWAN 2
• Corrected typo in “NB50000c and NB50000c-cg (BL860c) ” (page 50), in
which SPR revision BAA was incorrectly omitted from system firmware versions
3.01 and 4.11.
• Corrected the system identification in the note in “NS2200, NS2200T, and
NS2200ST (rx2800 i2)” (page 52)
• Corrected the system identification in the note in “NS2100 (rx2800 i2)”
(page 52)
• Added the new section “Updating rx2800 i2 Server Firmware” (page 63)
to provide common instructions for updating all rx2800 i2 NonStop servers.
• Added the new section “Installing HyperTerminal on NSCs running Windows
Server 2003” (page 73) to provide instructions for installing HyperTerminal
on an NSC running Windows Server 2003.
Made these changes:21 January 2013546227-022
• Updated references to Hotstuff HS03181D, HP Integrity Superdome 2, BL8x0c
i2 and rx2800 i2: Unexpected System Behavior Fixed with New System
Firmware.
• Added firmware version 26.34 and 26.35 for BL860c i2 NB54000c/c-cg
and rx2800 i2 NS2200 and NS2100. All older versions are obsolete and
must be updated to 26.34 or 26.35.
• Removed reference and link to OA firmware 3.56. This version should not
be used.
• Added “Updating BL860c i2 Blade System Firmware” (page 59) to provide
common instructions for updating all BL860c i2 NonStop blades.
See “Older New and Changed Information Entries” (page 77) for older entries.
Related Information
To upgrade firmware delivered on the SUT, see the Software Installation and Upgrade Guide for
your RVU.
Firmware that is delivered on the system console installer DVD is described in the System Console
Installer Guide.
For the compatibility of T0853 CLIM DVDs with NonStop RVUs, see CLuster I/O Module (CLIM)
Software Compatibility Reference.
Firmware updates directed by a field change order (FCO) are described in the FCO.
Replacing or upgrading some hardware components require firmware update, as described in the
applicable service procedures.
For information about using OSM actions to update firmware, see OSM online help.
For Important Safety Information, Safety and Compliance, and Waste Electrical and Electronic
Equipment (WEEE) information, see the HP Integrity NonStop Server Safety and Compliance
collection at http://www.hp.com/go/nonstop-docs.
NOTE: The NonStop Technical Library (NTL) is located at http://www.hp.com/go/nonstop-docs
(external view).
Information on replacing NonStop BladeSystem FRUs can be found in the Support and Service
section of NTL.
10