NonStop Firmware Matrices

Update Tool and Method
NonStop Supported
Levels
Hardware
Revision
Firmware
Component
NOTE: Also
refer to “Valid
System Firmware
and HSS
Combinations”
(page 50).
04.11B
04.15
04.15A*
UPS web interface (invoked from OSM Service
Connection)
1.14.2
2.02
AllUPS (HP
R12000/3)
2.04*
See download location.1.02.0026*AllUPS (HP R5000)
See download location for firmware. Also see HP R5500
XR High Volt Uninterruptible Power System (UPS) - How
2.04
2.08*
AllUPS (HP
R5500XR)
to Update the UPS Firmware to 2.08 from Previous Version
when using HP UPS Management Module for additional
instructions.
NOTE: A serial terminal with a Baud rate of 115200
is required to update firmware for an R5500XR UPS that
is equipped with an HP UPS Management Card. For
NonStop system consoles running either Windows Server
2003 or Windows Server 2008, use the MR-Win6530
Terminal Emulator version T0819 G06 AAO (or later),
available on NSC DVD Update 19 (and later) as the serial
terminal.
For NSCs running Windows Server 2003, if you do not
have MR-Win6530 version G06 AAO or later, you can
install HyperTerminal through the Windows Control Panel,
as described in “Installing HyperTerminal on NSCs
running Windows Server 2003” (page 73).
See download location.
CAUTION: Firmware versions 1.00.12 and 1.01.002
are no longer supported due the incompatibility between
these versions and the new network module hardware
PN 632555-001 revision D. If the HP UPS Network
Module Card Hardware Revision is BA, you must upgrade
the UPS management module firmware. To check, log
onto the HP UPS Network Module’s web interface, then
click Views > Power Source in the left menu. Then in the
UPS Status menu in the middle of the right pane, select
About your UPS. The Card Hardware Revision is listed in
the HP UPS Network Module section. If the revision is AA,
you do not need to update the firmware, if it is BA, you
must update the firmware immediately.
1.01.013*AllUPS management
module (HP
R5000)
See download location.1.3 (not available for
download)
AllUPS management
module
2.0
(R5500XR and
R12000/3)
2.1.3
2.1.11*
Firmware 3.30
Upgrade Guide
ConnectUPS
Web/SNMP
Card User Guide
3.30
3.32 (not available
for download)
Non-RoHS
compliant:
526193–001
(vendor PN:
103002974–5501)
UPS SNMP/Web
card (R5500XR
only)
16 NonStop Supported Levels for J06.04–J06.17 and H06.15–H06.28 for Firmware Not Delivered on the SUT