NonStop Firmware Matrices

Firmware LevelNonStop T-NumberFirmware
LevelSPR Revision
N/AT2773 H01DISKBOOT Firmware
• T2773 H01 (minimum
required)
• AAB (contains fixes)
AAB is required for starting
a system from a storage
CLIM.
N/AAAUT0630 G06FCSA flash
N/AAABT0612 G06FCSA flash boot
N/AAAST0613 G06G4SA boot
N/ANS14000 unmixed and
NS16000 unmixed
systems:
T0287 H01
NOTE: The Default Firmware
File Names in the OSM Service
Connection should be set before
performing the update of HSS,
PAL/SAL, Primitive State
firmware. This setting is done by
the OSM Service Connection
Initialize Default Firmware File
Names action on the System.
NOTE:
• AAJ supports starting the
system from a storage CLIM.
• HSS and primitive state
VPROCs will reflect AAD even
though they are packaged in
the AAE SPR.
• AAE (minimum required)
• AAH (contains fixes)
• AAJ (contains fixes)
• AAK (contains fixes)
NS14200 unmixed and
NS14000/NS14200
mixed systems:
• AAH (minimum
required)
• AAJ (contains fixes)
• AAK (contains fixes)
NS16200 unmixed and
NS16000/NS16200
mixed systems:
• AAI (minimum required)
• AAH (contains fixes)
NOTE: AAH was
released after AAI.
• AAJ (contains fixes)
• AAK (contains fixes)
See Valid System Firmware
and HSS Combinations
(page 50) for other system
types.
N/AAATT2805 A01IOAM enclosure ServerNet switch
N/AN/AT0480 H01ISP1040 Firmware
MSA70: 2.18AAFT0841 H01MSA70 and D2700 disk
enclosures (SAS)
D2700: 0144
M8390-12CG: 3023AAGT0856 H01SAS CG Disk Enclosure
P2000: 1130
M8391-24X: 1058
N/AABTT1089 G06PMF and PMF 2, IOMF and
IOMF2
SUT Delivered NonStop Firmware Levels for J06.15 and H06.26 25