NonStop Firmware Matrices

Firmware LevelNonStop T-NumberFirmware
LevelSPR Revision
A09 01/11/2009AACT0848 H01CLIM BIOS (ROM) G6
FC1242SR: FW
4.00.90 BIOS 1.26
AABT0843 H01CLIM FC HBA
82Q: FW 4.04.04
BIOS 2.12
1.82AACT0848 H01CLIM iLO
nc373i and nc373F:
1.9.6
AABT0849 H01CLIM NIC
nc382i: 5.2.2
Sc44Ge (B1and B3):
FW 01.25.00.00,
BIOS 06.18.02.00
AACT0842 H01CLIM SAS HBA
Sc08e: FW
05.00.13.00, BIOS
07.05.02.00
P410i: 3.00N/AT0846 H01CLIM Smart Array Controller
N/AT2773 H01DISKBOOT Firmware
• T2773 H01 (minimum
required)
• AAB (contains fixes)
AAB is required for starting
a system from a storage
CLIM.
N/AAART0630 G06FCSA flash
N/AAABT0612 G06FCSA flash boot
N/AAABT0612 G06G4SA boot
N/ANS14000 unmixed and
NS16000 unmixed
systems:
T0287 H01HSS, PAL/SAL, Primitive State
NOTE: The Default Firmware
File Names in the OSM Service
Connection should be set before
performing the update of HSS,
PAL/SAL, Primitive State
firmware. This setting is done by
the OSM Service Connection
Initialize Default Firmware File
Names action on the System.
NOTE:
• AAJ supports starting the
system from a storage CLIM.
• HSS and primitive state
VPROCs will reflect AAD even
though they are packaged in
the AAE SPR.
• AAE (minimum required)
• AAH (contains fixes)
• AAJ (contains fixes)
NS14200 unmixed and
NS14000/NS14200
mixed systems:
• AAH (minimum
required)
• AAJ (contains fixes)
NS16200 unmixed and
NS16000/NS16200
mixed systems:
• AAI (minimum required)
• AAH (contains fixes)
NOTE: AAH was
released after AAI.
• AAJ (contains fixes)
See Valid System Firmware
and HSS Combinations
36 NonStop Firmware Levels Delivered on the SUT By Release