NonStop Firmware Matrices

Firmware LevelNonStop T-NumberFirmware
LevelSPR Revision
N/ANS14000 unmixed and
NS16000 unmixed
systems:
T0287 H01HSS, PAL/SAL, Primitive State
NOTE: The Default Firmware File
Names in the OSM Service
Connection should be set before
performing the update of HSS,
PAL/SAL, Primitive State firmware.
This setting is done by the OSM
Service Connection Initialize
Default Firmware File Names
action on the System.
NOTE: HSS and primitive state
VPROCs will reflect AAD even
though they are packaged in the
AAE SPR.
• AAE (minimum required)
• AAH (contains fixes)
NS14200 unmixed and
NS14000/NS14200
mixed systems:
• AAH (minimum
required)
NS16200 unmixed and
NS16000/NS16200
mixed systems:
• AAI (minimum required)
• AAH (contains fixes)
NOTE: AAH was
released after AAI.
See Valid System Firmware
and HSS Combinations
(page 50) for other system
types.
N/AAART2805 A01IOAM enclosure ServerNet switch
N/AN/AT0480 H01ISP1040 Firmware
3023AABT0856 H01M8390-12CG disk enclosure (SAS
CG)
2.16AAAT0841 H01MSA70 disk enclosure (SAS)
N/AABRT1089 G06PMF and PMF 2, IOMF and
IOMF2
N/AN/AT0815 H01ServerNet switch (c7000
enclosure) ME FPGA (see Caution
below)
N/AAABT0437 A01ServerNet switch (IOAM enclosure)
ME FPGA (see Caution below)
N/AN/AT0789 H01ServerNet switch (VIO enclosure
logic board) ME FPGA
N/AAAPT7953SWAN and SWAN 2
N/AAADT1805 A01VIO enclosure logic board
CAUTION: You should not use the Multi-Resource Actions dialog (in the OSM Service Connection)
to update ME FPGA simultaneously on both fabrics, or a system outage might occur.
SUT Delivered NonStop Firmware Levels for J06.07 and H06.18 43