NonStop Firmware Matrices

New and Changed Information in This Edition
Change bars in this edition are for 546227-026.
ChangesDateVersion
• Made the following changes to “Minimum Supported OA Firmware Levels
for NonStop BladeSystems” (page 56)
◦ Added a note indicating that OA FW version 4.01 requires either J06.17
or later or OSM SPR T0682ADH or later for RVUs older than J06.17.
◦ Updated the note about OA FW version 3.60 to indicate that compatibility
requirements are for J06.16 or later RVUs or OSM SPR T0682ADF or
later SPRs.
2 April 2014546227–026
24 February
2014
546227–025
• Updated the following in “NonStop Supported Levels for J06.04–J06.17 and
H06.15–H06.28 for Firmware Not Delivered on the SUT ” (page 12):
◦ Added information about firmware download authorizations.
◦ Added an entry for the rx2800 i4 (NS2300 and NS2400/T/ST).
◦ Added Onboard Administrator (OA) recommended firmware version 4.01.
◦ Corrected the download location for OA firmware version 3.31.
◦ Added recommended firmware version for ProCurve Maintenance Switch
J9782A (2530-24).
◦ Updated the download location for ProCurve maintenance switch J9019B
(2510B-24) firmware versions Q.11.17 and Q.11.26.
◦ Updated the download location for ProCurve maintenance switch (2524)
firmware.
◦ Changed the supported firmware version for the UPS management module
(HP R5000) to 1.01.013 as the only supported version.
◦ Changed the recommended firmware version for the Interconnect 6125G
Ethernet Switch (C7000).
◦ Updated the download location for UPS (HP R12000/3) firmware versions.
• Added the new section “SUT Delivered NonStop Firmware Levels for J06.17
and H06.28” (page 18). Edited this section to describe differences from the
previous RVU:
◦ Updated CLIM SAS HBA firmware level to AAF for
H221:Firmware:FW0842C:15.10.01.00.
◦ Updated CLIM Smart Array Controller firmware level to AAE for P420i:
4.68.
◦ Updated c7000 enclosure ServerNet switch blade ME firmware level to
AAT.
◦ Updated MSA70 and D2700 disk enclosures (SAS) firmware level to AAG
for D2700: 0147.
◦ Updated SAS CG Disk Enclosure firmware level to AAI for a change to
the download script only. Firmware levels are unchanged.
◦ Updated CLIM BIOS (ROM) G6 and Gen8 to AAI.
◦ Updated CLIM iLO 4 firmware (Gen8) to AAI.
◦ Updated CLIM NIC firmware to AAH for 331FLR and 332T changes only.
6